Help lock cylinder: GL 150 Touring ´62

[ernesto_cero]

Friends of the night,

I am about to bring a Swedish Touring '62 GL 150 back to the road. After pausing in a Swedish barn for 36 years, the scooter shall now be reactivated in Berlin.
The trouble is: I had to drill out the lock since no key was left. The built-in Swedish GL lock cylinder has a different format and is not compatible with the German and Italian models. Unfortunately there are no Swedish locking cylinders as spare parts for the old models available in Germany or internet-shops I found . ;-(

The dimensions of the lock cylinder is as follows: 35 mm * 9.9 mm * 4mm.

Therefore I´m now here in the famous “svenska scooter klubben” Who can help?

Greetings Marc

Here are some pictures:

[Paka]

Unfortunately very, very rare. The lock cylinders were made by DOM gmbh, so my tip is that you keep searching in Germany.
Piaggio spare part #56452
/P

[ernesto_cero]

@Paka: Thanks! Tomorrow i will contact DOM for more Information. We will see. Are the any big swedish scooter internet shops which you can recommend?

[Ebbe]

Hallo!
Vieleicht kan ich dir helfen! Hab einige Teile von meiner alten Touring übrig, unter anderen auch ein Zylinder mit Schlüssel für das Schloss. Es ähnelt das auf dem bild aber um sicher zu sein bräuchte ich die richtigen masse des Zylinders.
Grüsse
Ebbe